Name:     ID: 
 
Email: 

PC Repair II Quiz 2

Multiple Choice
Identify the choice that best completes the statement or answers the question.
 

 1. 

Which of the following is a requirement for supporting the Aero user interface?
a.
an HDMI video port
c.
at least 128 KB video memory
b.
Windows XP with SP3
d.
DirectX 9 or higher
 

 2. 

If a computer is performing slowly due to file fragmentation, what Windows tool can be utilized to rearrange fragments?
a.
Disk cleanup
c.
defragmentation tool
b.
Computer Management
d.
defraggler
 

 3. 

What might be the cause of a black screen right after you install a new video card?
a.
the onboard video is not disabled in BIOS
b.
no video card is detected
c.
you installed the video card in the wrong slot
d.
the video card has insufficient RAM
 

 4. 

A DAT72 tape is also known by what term?
a.
DDS-3
c.
DDS-4
b.
DDS-5
d.
DDS-2
 

 5. 

A SuperSpeed USB port is capable of attaining what maximum data transfer speed?
a.
1.5 Gbps
c.
1.2 Gbps
b.
5 Gbps
d.
6 Gbps
 

 6. 

Three long beeps during the POST sequence on an Intel BIOS are an indication of what type of issue?
a.
keyboard controller problem
c.
memory error
b.
motherboard problem
d.
system overheat
 

 7. 

What is the distance between adjacent dots on a screen known as?
a.
viewing angle
c.
native resolution
b.
refresh rate
d.
pixel pitch
 

 8. 

What command line utility can be used to repair the BCD on a Windows installation?
a.
dfrgl
c.
chkdsk
b.
fsutil
d.
Bootrec
 

 9. 

If you see an error message that reads "Processor thermal trip error", what is the likely problem?
a.
the processor has overheated
c.
the processor has failed
b.
the power supply is inadequate
d.
a memory module might be bad
 

 10. 

What happens when a flash memory card is installed in a slot and it is recognized by Windows?
a.
a drive letter is assigned to the device and you can see it in Explorer
b.
a window appears prompting you to initialize the device
c.
Windows automatically partitions and formats the device
d.
the files are copied from the device to your Documents folder
 

 11. 

What icon might you see in Device Manager that indicates a problem with a device?
a.
blue circle
c.
red square
b.
yellow triangle
d.
white oval
 

 12. 

What type of RAID is a combination of mirroring and striping?
a.
RAID0
c.
RAID10
b.
RAID5
d.
RAID1
 

 13. 

What type of backlighting receives DC power directly from a motherboard and doesn't use an inverter?
a.
LED
c.
Plasma
b.
OLED
d.
CCFL
 

 14. 

What statement best describes a RAID 5?
a.
it improves performance but not fault tolerance
b.
data from one drive is mirrored to another
c.
it requires 3 or more drives and uses parity checking
d.
it takes at least four disks and data is striped and mirrored
 

 15. 

If a user on a laptop complains that they are unable to sign into Windows even though they are certain they are entering the correct password, what should you have them do?
a.
Replace the laptop keyboard
b.
check the NumLock indicator on the laptop
c.
perform a reboot
d.
bring the laptop to an authorized repair shop
 

 16. 

What does a single beep or no beep imply during the startup of a computer?
a.
a memory error
c.
a keyboard controller problem
b.
a video problem
d.
all POST tests passed
 

 17. 

Which type of video port provides a digital-only signal?
a.
VGA
c.
DVI-D
b.
DVI-A
d.
DVI-I
 

 18. 

What should you install in a server room that will save space by allowing you to control multiple servers with a single mouse, keyboard, and monitor?
a.
a MIDI connector
c.
a KVM switch
b.
a digitizer
d.
biometric device
 

 19. 

In order to enable the Windows 7 Aero user interface, how much video memory must be available to the video controller?
a.
64MB
c.
256MB
b.
1GB
d.
128MB
 

 20. 

What is a typical symptom of a CMOS battery failure?
a.
time and date settings lost
c.
POST code beeps
b.
continuous reboots
d.
blue screen of death
 

 21. 

When testing a laptop power connector, how close should the voltage measured be to the accepted voltage of the laptop?
a.
+/- 10%
c.
The voltage should be exactly the same
b.
+/- 5%
d.
+/- 1%
 

 22. 

What process writes sector markings to a hard drive?
a.
partitioning
c.
sector provisioning
b.
high-level formatting
d.
low-level formatting
 

 23. 

Which type of RAID volume is used for fault tolerance and only requires two drives?
a.
RAID10
c.
RAID0
b.
RAID1
d.
RAID5
 

 24. 

If you are adding a hard drive to a system that already has a drive with Windows installed on it, what should you do?
a.
boot Windows and use Disk Management to prepare the new drive
b.
use the BIOS setup screen to partition and format the new drive
c.
check that the new hard drive must use the same standard as the Windows drive
d.
you should boot from the Windows setup DVD to prepare the new drive
 

 25. 

Which statement regarding the selection of a hard drive is accurate?
a.
magnetic drives have larger capacity for the money than solid state drives
b.
PATA drives are backward compatible with SATA drives
c.
a faster spindle speed keeps the drive cooler but doesn't improve performance
d.
USB drives are a good choice for fast internal drives
 



 
         Start Over