True/False
Indicate whether the
statement is true or false.
|
|
|
1.
|
When drawing the lines for the perimeter of the house in Warm-Up #1, it is
possible to type in the length of the line at the line is being adding to the drawing?
|
|
|
2.
|
After creating a Rectangle using the Draw panel tool, it may be moved by picking
on only one of the four lines.
|
Multiple Choice
Identify the
choice that best completes the statement or answers the question.
|
|
|
3.
|
When saving the drawing files for the tutorial, you should save them
_______.
a. | at the beginning of the tutorial | c. | after every major
change | b. | every 30 minutes | d. | all of the above |
|
|
|
4.
|
The template file that is used for the first Warm-Up exercise is
________.
a. | Default | c. | Residential Template | b. | Construction Template | d. | Commercial
Template |
|
|
|
5.
|
What type of view is used when drawing the projects for the initial Warm-Up
projects?
a. | model view | c. | drafting view | b. | drawing view | d. | beginning view |
|
|
|
6.
|
What type of line is used when drawing the views for the Warm-Up
projects?
a. | model line | c. | drawing line | b. | detail line | d. | annotation line |
|
|
|
7.
|
The name of the tool used to quickly join to intersecting lines together is
called the _________ tool.
a. | move | c. | trim/extend to corner | b. | mirror | d. | join line |
|
|
|
8.
|
When using a tool in Revit, sometimes a green tab will appear with specific
commands related to the tool. This tab is known as a(n) _________ tab.
a. | Specific | c. | Helpful | b. | Contextual | d. | Assistance |
|
|
|
9.
|
The name of the tool used to connect a line to another line without affecting
the second line/element is called the _________ tool.
a. | Trim/Extend to corner | c. | Trim/Extend Single Element | b. | Mirror | d. | Array |
|
|
|
10.
|
When creating the front door for the Warm-Up Exercise #1, two hidden lines are
required. What snap mode is used to help place the left endpoint of the line exactly at the halfway
point?
a. | Endpoint | c. | Midpoint | b. | Halfpoint | d. | Equalpoint |
|
|
|
11.
|
What tab contains the tool to place dimensions on the drawing.
a. | Dimension | c. | Annotate | b. | Analyze | d. | Architecture |
|
|
|
12.
|
After completing the front and plan views for the Warm-Up Exercise, you are
required to place the views onto a sheet. What tab contains the tool to begin this process?
a. | Sheet Composition | c. | Sheet | b. | Load | d. | View |
|
|
|
13.
|
Refer to Warm-Up Exercise #2 when answering this question. What tool is used to
quickly copy the upper left corner of the object to the correct location on the upper right
corner?
a. | Mirror – Pick Axis | c. | Copy – Draw
Axis | b. | Mirror – Draw Axis | d. | Move |
|
|
|
14.
|
When using the Snap function, which of the following shapes indicates that the
user has snapped to the midpoint of an object?
a. | Square | c. | Circle | b. | Hexagon | d. | Triangle |
|
|
|
15.
|
In the Draw panel, what tool is used to place a triangle based on the distance
from the center to one of the corners?
a. | Inscribed Polygon | c. | Corner Polygon | b. | Circumscribed Polygon | d. | Edges Polygon |
|