Multiple Choice
Identify the
choice that best completes the statement or answers the question.
|
|
|
1.
|
What is the name of the tool
used to create the gypsum-filled area for the ceiling in Lighting Plan exercise?
a. | Create
Region | c. | Masking
Region | b. | Filled Region | d. | Pattern Region |
|
|
|
2.
|
What is clicked first to modify
the location of the object when using a dimension that has been used to annotate the
size/location?
a. | The object to be
modified. | c. | The dimension line
that is controlling the size/location of the object. | b. | The extension line that is attached to the
object. | d. | The dimension text of the dimension that is controlling
the size/location of the object. |
|
|
|
3.
|
For the Residential Project,
the Project Base Point is used to ___________.
a. | locate the start point of the walls
of the structure | c. | locate the lower
left corner of the boundary of the property | b. | locate the base height of the
topography | d. | locate the upper right edge of the
topography |
|
|
|
4.
|
When dimensioning the exterior
walls of the house, the witness lines are located at the _________.
a. | center of the
core | c. | inside face of
core | b. | outside face of core | d. | outside face of wall |
|
|
|
5.
|
What is the name of the tool
used to add missing dimensions to an existing chain of dimensions?
a. | Add Dimension to
Chain | c. | Edit Witness
Lines | b. | Add Witness Lines | d. | Modify Dimension Chain |
|
|
|
6.
|
What view option in the
Properties box is used to show a gray scale view overlapping the current view?
a. | Overlip | c. | Overdone | b. | Underlap | d. | Underlay |
|
|
|
7.
|
What method is used to aid in
spacing the dimensions the correct distance from the walls?
a. | Use two or three squares placed at
the midpoint of the walls. The dimension lines are then located at the edge of the
shapes. | c. | Use two or three
triangles placed at the corners of the walls. The dimension lines are then located at the edge of the
shapes.
| b. | Use two or three circles placed at the corners of the walls. The dimension
lines are then located at the edge of the shapes. | d. | Use two or three ellipses placed at the midpoint of the walls. The dimension
lines are then located at the edge of the shapes. |
|
|
|
8.
|
According to the Residential
Tutorial, when at 1/4” = 1’-0” scale, dimensions are placed _____ feet from the
wall for the first dimension line and then spaced _____ feet from the first dimension line to the
second.
|
|
|
9.
|
When tagging the doors on the
floor plan, the final location of the tags for doors around the exterior of the house should be
________.
a. | on top of the door
symbol | c. | halfway between the exterior wall
and the first dimension line | b. | on the inside of the room/space that the door is
located | d. | to the right of the door approximately 1/16” from
the exterior of the wall
|
|
|
|
10.
|
When sketching the boundary of
the garage slab the edge of the slab is placed ________ in relation to the exterior
walls.
a. | at the center of the
framing | c. | at the inside edge
of the framing | b. | at the inside edge of the gypsum board layer | d. | at the outside edge of the
framing |
|
|
|
11.
|
Prior to placing the footers
around the edge of the slabs, you must first load a _______ from the families folder on the network
drive.
a. | symbol | c. | drawing | b. | slab type | d. | profile |
|
|
|
12.
|
When adding kitchen cabinetry
to the project, what should you do if the cabinet size is not available in the family
choices?
a. | Download a family with the correct
size from the bimobject.com site. | c. | Create a new size by editing the size in the Type Properties dialog
box.
| b. | Create a new size by editing the size in the Project
Browser. | d. | Download a family with the correct
size from the Revit family folders. |
|
|
|
13.
|
What dialog box contains the
setting to change the Elevation Swing to a hidden line style for all elevation views in the
project?
a. | Object
Styles | c. | Visibility/Graphics
Overrides | b. | Manage | d. | Additional
Settings |
|
|
|
14.
|
What is the name of the tool
and option used to create the raised concrete platform in the garage?
a. | Component, Place a
Component | c. | Component,
Concrete | b. | Component, Create Platform | d. | Component, Model In-Place |
|
|
|
15.
|
To create the custom counter
top, what is the basic sequence of steps and tools used? (Not all steps and tools are
shown.)
a. | Component tool, Model In-Place,
Extrusion Tool, choose the Family Category, draw the shape, click the Green
Check | c. | Component tool, choose the Family
Category, Model In-Place, Extrusion Tool, draw the shape, click the Green
Check | b. | Model In-Place, Component tool, choose the Family Category, Extrusion Tool,
draw the shape, click the Green Check | d. | Component tool, Model In-Place, choose the Family Category, Extrusion Tool,
draw the shape, click the Green Check |
|